Orange Injection Pump

Product Detail:

Describe：

The c high pressure injection pump is a professional machine used for high pressure chemical grouting, which works with both single and double component grouting material.Single Component Injection Pump It is the professional machine which is applied in the structure perfusion, equipped with super pressure. To solve out the inconvenience of the carrier, it is very light and it is the best choice of stanch worker. Speedy Construction : can be advanced to 5000PSI in a few seconds, and the working time will be shorter than other machine.Low gross, easy to carry

Colour:White/Golden/Black

• Output pressure : 13000PSI

• Restart pressure : < 8000PSI

• Driving power: 220V/700W/50HZ

• Max size : 0-2MM

• Weight: 8KG

Send email to us

Product Detail

FAQ

Product Tags

PACKING：

QTY:1STE/CTN

Full set of machine include

Drill : lset550W High pressure hose : 1 pc5M Switch open-off valve: 1 set

Repairing kit: 1 set Rubber and spring sets: 1 set T type wrench: lpc

Grease coupler: lpc Filter: 1 pc Materialcup : 1 set

CARTON SIZE:44*17*40CM

Application Field：

Subway, tunnels,culverts,foundation improvement, land subsidence, reservoirs, port works, roof, cracks, construction connections, shrinkage cracks, basement fissures and otherwater stopping projects

Material of application：

• Applicable injection materials: water-based polyurethane, oil-based polyurethane , epoxy resin material, acrylic resin material and other non-granular, low viscosity materials.

Advantage：

Light weight, small size, easy to carry and move.

Effectively:The pressure can be raised from 0 ~ 15000psi in a few seconds.Time-saving and high efficiency.

Environmental protection：Good mechanical performance, no noise, no pollution

Easy to repair: it can be repaired and replaced the spare parts to avoid waste.

Continuous pressure: The machine can effectively fill small cracks and carding, and obtain good plugging and structural strengthening effect.